360˚ sealed filtration. Removes gases and pollutants.
The only purifier with vacuum-sealed H-13 Glass HEPA and activated carbon filters4 which work together to capture ultrafine particles and gases, preventing dirty air from leaking back into the room
Glass HEPA filter
Made with 9 metres of borosilicate microfibres, pleated over 200 times. It removes 99.95% of allergens and pollutants as small as 0.1 microns.¹
¹Tested for filtration efficiency at 0.1 microns (EN1822).
Activated carbon filter
Engineered using a dense layer of carbon crystals, and treated with oxygen to make it more porous. This increases the carbon's surface area, further helping to trap gases – such as formaldehyde, benzene and NO₂.
Continually monitors air quality, and reacts
The only air purifier that senses and reports 4 different pollutants in real time - PM2.5, PM10, VOCs, NO2.4 With three intelligent sensors to monitor what's in the air, it uses a unique algorithm to provide real-time indoor air quality reports.
4Based on internal study completed in June 2020.
Some purifiers and heaters only treat the air surrounding them
Dyson Pure Hot+Cool™ heats and purifies the whole room
²Tested for air projection (DTM801), purification coverage in a 81m3 room (TM-003711), and heating performance in a 35m3 room (DTM 961).
Fast, safe, efficient heating
Positive Temperature Coefficient plates
Self-regulating ceramic plates are positioned at the front of the amp, to heat the air as it leaves the machine. As the plates heat up, they conduct less electricity to help ensure they don’t overheat.
Thermostat control
Once your target temperature is reached, the machine automatically stops heating, which saves energy. If the temperature starts to drop, it reactivates to maintain it.
Powerful Air Multiplier™ technology
Air Multiplier™ technology delivers over 290 litres of smooth, powerful airflow per second – circulating purified air throughout the whole room.³
³In maximum setting. Tested for air projection (DTM801), purification coverage in a 81m3 room (TM-003711), and heating performance in a 35m3 room (DTM 961).
Two airflow modes
The machine has two separate apertures, to release air from either the front or back of the machine. The valve mechanism turns a rotational baffle around the arc of the amplifier, to switch the direction of the airflow.
Forward projection
Delivers a powerful stream of cooling, purified air from the front of the machine.*
Diffused projection
The machine diverts air through the rear annular at a 45˚ angle, creating a diffused airflow.
1Fan, not air-conditioning unit.