Fast energy efficient HEPA–filtered hand dryer
• 10–12 second dry time1
• Hygienic performance with HEPA filter2
• Less expensive than single–use paper towels3
• 5-year parts warranty, easy self-service
• Max and Eco mode available
• Available in two voltage options
Proven hygienic by independent testing
All Dyson Airblade™ hand dryers undergo rigorous testing by Dyson. The impact of drying hands has been tested in universities and published in international journals.
Key features
Low energy. Low running costs.
The Dyson Airblade 9kJ hand dryer uses 9.1 kilojoules of energy per dry and costs just US$19 a year to run3 in Eco mode.
Curved Blade™ design
Sheets of air travelling at 624 km/h follow the contours of your hands, removing water in less time.
Acoustically engineered
Our quietest4 Dyson Airblade™ hand dryer features silencers made from open-cell foam and perforated discs, reducing noise as airflow passes through the motor.
Fleece-lined glass fibre HEPA filter
Captures 99.95% of particles5 as small as 0.1 microns.
Dyson digital motor V4
Spins 75,000 times a minute6 to quickly and hygienically dry hands.
Key technology
-
Curved Blade™ design
Sheets of air travelling at 624 km/h follow the contours of your hands, removing water in less time.
-
Hygienically dries hands with cleaner air
The HEPA filter captures 99.95% of particles5 as small as 0.1 microns from the washroom air, before it’s blown onto hands. So hands are dried with cleaner air, not dirty air.
-
Our quietest4 Dyson Airblade™ hand dryer yet
Acoustically engineered to minimise washroom noise.
Additional features
-
A power mode to suit your washroom
Switch between two power modes. Max mode for busy areas of high footfall or Eco mode for energy-efficiency and acoustic control.
-
Fast hand drying in 10 seconds1
Our powerful digital motor spins at 75,000 rpm to shift 23 litres of air per second, for a 10 second dry time in Max mode.
-
Less waste
The Dyson Airblade 9kJ hand dryer produces up to 85% less CO2 than single-use paper towels7. Creating a better environment in your washrooms and the world outside.
Accreditations
-
Quiet Mark
The Dyson Airblade™ 9kJ hand dryer has been awarded the Quiet Mark certification by the Noise Abatement Society.
-
Carbon Trust
All Dyson Airblade™ hand dryers are certified by the Carbon Trust.
Specifications
-
Dry time (Eco)
12 seconds
Motor power (Eco)
650w
Sound power level (Eco)
77dBA -
Dry Time (Max)
10 seconds
Motor Power (Max)
900w
Sound power level (Max)
79dBA -
Weight
4.5kg
Stainless steel grade
304L
IP rating
IP24 -
Height
500mm
Length
100mm
Width
450mm -
-
Useful documents
Frequently asked questions
The power mode can be set at installation of the product to either Max or Eco mode. Max mode operates at 900W and delivers a 10 second dry time, perfect for high footfall environments. Eco mode, operating at 650W, delivers a 12 second dry time but uses only 9.1kJ of energy per dry and is better suited for locations such as offices. The power mode can be altered following install but would need removal from the wall to do so as the switch is not accessible externally.
To ensure the machine performs to its best and remains hygienic, the Dyson Airblade 9kJ hand dryer should be cleaned daily. Please refer to the cleaning guide for further information (see above).
Splashbacks are recommended for use on plasterboard and cavity walls. They can also be used when replacing other Dyson Airblade™ hand dryers.
Explore the Dyson Airblade™ hand dryer range
1 Dry time determined using Dyson test method 769 based on NSF P335 to a measurement of 0.1g residual moisture.
2 HEPA filter tested to EN1822-5, by an independent testing laboratory, under prescribed test conditions.
3 For more information please contact your local Dyson Professional sales team.
4 Average loudness (measured in sones) compared to Dyson Airblade™ hand dryers.
5 HEPA filter tested to EN1822-5, by an independent testing laboratory, under prescribed test conditions.
6 Measured in Max mode.
7 The environmental impact of electrical appliances and paper towels was measured by Carbon Trust. The calculations were produced using the software Footprint Expert Pro, based on product use over 5 years and using weighted averages of individual countries of use. Dry times for product were evaluated using DTM 769.
2 HEPA filter tested to EN1822-5, by an independent testing laboratory, under prescribed test conditions.
3 For more information please contact your local Dyson Professional sales team.
4 Average loudness (measured in sones) compared to Dyson Airblade™ hand dryers.
5 HEPA filter tested to EN1822-5, by an independent testing laboratory, under prescribed test conditions.
6 Measured in Max mode.
7 The environmental impact of electrical appliances and paper towels was measured by Carbon Trust. The calculations were produced using the software Footprint Expert Pro, based on product use over 5 years and using weighted averages of individual countries of use. Dry times for product were evaluated using DTM 769.